My Cart - items
items in your cart
Order summary
Total:
Grand Total:
*Shipping & taxes calculated at checkout
C-Section
The C-Section reach provides both strength and flexibility without rotating collars. |
Front Spindle
H&S models 612, 614 & 617 have L-shaped front spindles with structural bracing to withstand high stresses from shock loads. |
Spring Assist
The spring assist is standard on all models (except the 406, where it is optional) and it is adjustable from a light assist to full support. |
Stake Pocket Wear Plates
Stake pocket wear plates are standard on all models. |
T Style Spindle The H&S model 622 utilizes a T-style spindle assembly, and uses truck type steering because ofincreased torque loads that result from the use of wide flotation or truck tires. |
Tele Pole
The tele-pole is made of structural tubing and the mounting plates have wide spacing between them to reduce sway and increase the strength of the pole. King Pin, Hitch Pin, Spindles, Tie Rod Ends and Tie Rod Steering Pivot Point are all wear protected by replaceable oil impregnated steel bushings and are greaseable as well. |
Thrust Bearings
The H&S heavy running gears models 415 through 420 utilize thrust bearings to assure dependable, smooth turning and straight trailing. |
Tie Rod
The tie rod is positioned behind the bolster on all models and is a one-piece design that reduces the number of wear point that could change the toe-in and tracking. |
Turn Stops
Full Contact Turn Stops distributes the pressure exerted in tight dragging turns along the bolster face. This reduces the possibility of bunk damage or collapse. |
Wishbone Tandem Axle
H&S models 612 and 614 have a wishbone design tandem axle to reduce mud build-up & clogging. |
612 | |
---|---|
CAPACITY | 12 TON |
WEIGHT W/TIRES | 1524# w/12.5L |
TREAD WIDTH | 80″ |
SPINDLES | 2″ |
HUBS | 6 BOLT |
BOLSTER | 3″ x 8″ |
C-REACH | 7 GAUGE |
WHEEL BASE | 119″ TO 159″ IN 10″ INCREMENTS |
STANDARD WHEEL | 15 x 10 |
WHEEL OPTIONS | N/A |
BRAKES | N/A |
BACK HITCH | N/A |
TELESCOPING POLE | 77″ FIXED, EXTENDS TO 89″ |
614 | |
---|---|
CAPACITY | 14 TON |
WEIGHT W/TIRES | 1620# w/12.5L |
TREAD WIDTH | 80″ |
SPINDLES | 2.25″ |
HUBS | 8 BOLT |
BOLSTER | 4″ x 8″ |
C-REACH | 7 GAUGE |
WHEEL BASE | 119″ TO 159″ IN 10″ INCREMENTS |
STANDARD WHEEL | 15 x 10 |
WHEEL OPTIONS | 16.1 x 11 |
BRAKES | OPT. HYD. SURGE |
BACK HITCH | N/A |
TELESCOPING POLE | 77″ FIXED, EXTENDS TO 89″ |
617 | |
---|---|
CAPACITY | 17 TON |
WEIGHT W/TIRES | 2480# w/16.5L |
TREAD WIDTH | 80″ |
SPINDLES | 2.75″ |
HUBS | 8 BOLT |
BOLSTER | 4″ x 8″ |
C-REACH | ⅜″ WELDMENT |
WHEEL BASE | 119″ TO 179″ IN 10″ INCREMENTS |
STANDARD WHEEL | 16.1 x 14 |
WHEEL OPTIONS | N/A |
BRAKES | OPT. HYD. SURGE |
BACK HITCH | N/A |
TELESCOPING POLE | FIXED AT 95.5″ |
622 | |
---|---|
CAPACITY | 22 TON |
WEIGHT W/TIRES | 3580# w/21.5L |
TREAD WIDTH | 87″ |
SPINDLES | 3″ |
HUBS | 8 BOLT |
BOLSTER | 4″ x 8″ |
C-REACH | ⅜″ WELDMENT |
WHEEL BASE | 119″ TO 179″ IN 10″ INCREMENTS |
STANDARD WHEEL | 16.1 x 18 or 22.5 x 13.5 |
WHEEL OPTIONS | N/A |
BRAKES | OPT. HYD. SURGE |
BACK HITCH | N/A |
TELESCOPING POLE | FIXED AT 89″ |
WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.